DOUBLE STAND for BEHRINGER TD-3 / RD-6 (30° and 65°)
Dual-angle stand for Behringer TD-3 and RD-6 synthesizers. Features 30-degree and 65-degree ergonomic tilts with rubber pads for stability. Tool-free EasyLock slide installation. Reduces desktop footprint while improving visibility and cable management. Portable stand for studio and live performance use.
DOUBLE STAND
for your
– BEHRINGER TD-3
– BEHRINGER RD-6
“DOUBLE STAND with rubber pads for your BEHRINGER TD-3 and BEHRINGER RD-6. The 30° and 65° angled tilt allows you to use both of your synths in an ergonomic layout. It helps you reach your gear more easily, improves visibility, and reduces the footprint on your desktop. The TD-3, RD-6, and the stand essentially become one unit.
STAND TYPE: EasyLock – SLIDE
EasyLock Slide is a type of stand of ours that allows easy side-sliding installation without the use of tools, as shown in the pictures. Make sure to place each leg on the correct side if they are different. Do not attempt to install the stand in any other way, such as from the bottom.
Advantages:
- Portability: It is portable, easy to set up, and ready to use immediately. The design ensures a snug fit and optimized use for each device.
- Stability: Very stable! The stand is built to be secure on desks, featuring rubber pads to prevent slipping and wobbling.
- Ease of Use: You can read and handle your device better from a distance.
- Cohesiveness: Together with these legs, you can manage your device as a cohesive system without worrying about it falling apart.
- Cable Management: A little elevation ensures you can organize your cables under the device, making placement more flexible. Unlike other universal laptop or closed stands, the elevated section between the legs provides cable management without needing to route around the device, which is an extremely convenient feature.
- No Rear Connecting Rod: Just two pieces, nothing else!
- Live Gig Friendly: You can bring it to your live gig – forget the heavy laptop stands and weird unstable things
Disadvantages:
- Decksaver Compatibility: Limited compatibility with Decksaver (if it exists for this device) or other hard covers because of the “bracket shape”. Solution: we make hand-tailored, waterproof, simple black DustCoverPro dust covers for most of the gears. Check availability in our shop!
____________________________________
ABOUT st3nD DESKTOP STANDS:
All our products are 3D printed, followed by post-procession by hand for each item individually. Our goal is to develop and manufacture high-quality desktop stands with the following features:
- Easy installation without glue, screws, or any tools.
- Stable and non-slip design, free of wobbling.
- Easily manage the stand and your device together as a cohesive system, moving them with one hand.
- The stand reduces the device’s footprint on your workspace, or at least doesn’t increase it.
- Lightweight yet strong.
- No middle rods or stabilizers needed (EasyLock stands).
- Extremely portable, perfect for taking to live gigs.
When designing and making stands, I keep these considerations in mind: I manufacture these stands one by one, ensuring that each piece is handmade and unique. This approach allows me to focus on high quality, although it means the stands may not be as inexpensive as mass-produced products. My goal is to lower prices as much as possible to save you money while maintaining high quality.
Customer Satisfaction and Quality Guarantee:
Since 2020, our continuously expanding product range and thousands of excellent reviews across various platforms guarantee that you won’t be disappointed! My mission is to enhance your creative process with better ergonomics, making it more enjoyable and productive. If you encounter any issues, please contact us, and we will resolve any problems to ensure your complete satisfaction. Our 3D printed stands are designed to provide long-lasting support for your devices, ensuring you can focus on your work or performance without any disruptions.
IMPORTANT:
The devices and other elements shown in the images are for illustration purposes only and are not included with the stands.
Shipping time depends on the preparation time, which we strive to minimize, as well as the distance and conditions of your country, and the shipping service or upgrades selected at checkout. For all our shipping services, we will provide you with a tracking number. If your package does not arrive within the estimated shipping time, please let us know, and we will investigate the issue to see what can be done.
By choosing st3nD, you are investing in a product that combines innovation with practicality. Our stands are not just tools; they are designed to seamlessly integrate into your workflow, enhancing your overall experience. Order your 3D printed desktop stand today and see the difference for yourself!
If you can’t find something you’re looking for, feel free to ask. We have overcome many unique demands, so it might just be that we already have a solution in our secret drawer. ;)
| Weight | 0,2 kg |
|---|---|
| Shape | ["Holder", "Tabletop Stand"] |
| Country/Region of Manufacture | Hungary |
| Brand | st3nD |
| Custom Bundle | No |
| Material | Plastic |
| Features | ["Anti-Skid", "Detachable Legs", "Double Braced", "Portable"] |
| Number of Tiers | 2 |
| Color | Black |
| Suitable For | ["Audio/MIDI Interface", "MIDI Keyboard & Controller", "Synthesizer"] |
| Mount | Double, EasyLock |
| Parameters | 30° |
| Product type | Stand |
Customer Reviews
Write your review
Only logged in customers who have purchased this product may leave a review. Log in now
What our customers say
Original price was: 775,01 kr.659,82 krCurrent price is: 659,82 kr. exc. VAT
In stock
Related products
-
DOUBLE STAND for KORG ELECTRIBE 2 SERIES
845,47 kr exc. VATAdd to cart -
STAND for DREADBOX TYPHON – 30°
291,89 kr exc. VATAdd to cart -
STAND for ARTURIA DRUMBRUTE – 30°
573,71 kr exc. VATAdd to cart -
STAND for ELEKTRON Digitakt / Digitone / Syntakt / Analog Heat Mk1 & Mk2 / Octatrack Mk2 – 30°
291,89 kr exc. VATAdd to cart
Verified eBay buyer (verified buyer) –
Got to the USA quicker than excepted from Europe and with a reasonable shipping cost. Also most importantly it works perfect as a stand for an RD-6 and TD-3
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified eBay buyer (verified buyer) –
A+++++
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Reverb buyer (verified buyer) –
Got here faster than expected for international purchase !
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified eBay buyer (verified buyer) –
Item as described, works as expected, wonderful design. I would definitely recommend.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified eBay buyer (verified buyer) –
Excellent. Really nice quality. Great design. Arrived early. Thanks.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Reverb buyer (verified buyer) –
Excellent stand. Perfect fit!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Reverb buyer (verified buyer) –
Good quality and shipping service!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified eBay buyer (verified buyer) –
Perfect item, very sturdy. Great communication and shipping. Recommended seller!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Etsy buyer (verified buyer) –
Great product and customer service. Recommended++
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Etsy buyer (verified buyer) –
Passt wirklich perfekt, sehr gute Qualität
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Etsy buyer (verified buyer) –
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified eBay buyer (verified buyer) –
good
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Etsy buyer (verified buyer) –
Love the details. And the triangle shapes help with cord management.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Etsy buyer (verified buyer) –
Another incredible design!!! Very well made, I’m very impressed with these stands and a fan of this company. Keeps my gear organized. I highly recommend this company above all others. Sincerely, Michael Dulsky. Electronique Workshop. P.S. Just finished setting them up and can’t wait to put them in my studio.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Etsy buyer (verified buyer) –
The stand arrived before the drum machine I bought from Guitar Center and that was only shipping from halfway across the country. The stand came from halfway across the world. Very fast shipping!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Etsy buyer (verified buyer) –
Perfect fit and arrived really fast.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Etsy buyer (verified buyer) –
Great quality ! Thanks !
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Etsy buyer (verified buyer) –
Great design, arrived fast. Really effective space management.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Etsy buyer (verified buyer) –
It was perfect! Love it!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified eBay buyer (verified buyer) –
Great stand!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified eBay buyer (verified buyer) –
Highly recommended seller. The product is of great quality and looks really good and is big bang for the buck! Aslo very nice communication and nice bonus in the package. :)
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified eBay buyer (verified buyer) –
Order delivered on time with no issues
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified eBay buyer (verified buyer) –
Order delivered on time with no issues
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Reverb buyer (verified buyer) –
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Etsy buyer (verified buyer) –
Great stand, sturdy, perfect fit for my TD-3 and TD-3-MO. Really good!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified eBay buyer (verified buyer) –
I have received the package. Everything is in good condition. Thanks for the smooth transaction.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified eBay buyer (verified buyer) –
Order delivered on time with no issues
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified Etsy buyer (verified buyer) –
Excellent high quality stand. I highly recommend this seller and excellent well made stands.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Verified eBay buyer (verified buyer) –
Order delivered on time with no issues
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal