DOUBLE STAND for CHASE BLISS Pedals – 30°
30-degree tilted stand designed specifically for two Chase Bliss pedals. This double stand for Chase Bliss pedals features rubber pads and precision 3D-printed construction for wobble-free stability on your desktop. The angled riser improves accessibility and ergonomics, making it the ideal stand for Chase Bliss pedals when you need better visibility and easier reach during performance or setup.
30° DOUBLE STAND
for your TWO of CHASE BLISS PEDALS
30° tilted DOUBLE STAND with rubber pads for your Chase Bliss PEDALS. This Chase Bliss double stand is very good solution if you’d like to tilt your devices for better visual accessibility and easier reach on your desktop. Please note that in this configuration, the rear switches of the lower devices will not be accessible.
Just slip the legs on from the sides, and you’re ready to go!
COMPATIBLE with:
Ayahuasca, Billy Strings Wombtone, Bliss Factory, Brothers, Brothers AM – Monochrome Edition, Clean – Creative Compressor, Condor, Condor HiFi, Dark World, Dynamic Sampler, Generation Loss, Generation Loss MKII – VHS Duplicator, Gravitas, Habit – Echo Collector, Lost + Found, Lossy – Artifacts on Demand, Lossy – Monochrome Edition, Onward, Reverse Mode C, Spectre, Thermae, Tonal Recall, Tonal Recall RKM, Warped Vinyl HiFi, Warped Vinyl MKI, Warped Vinyl MKII, Wombtone MKI, Wombtone MKII
NOT Compatible with:
Blooper – Bottomless Looper, CMX 1978 Vintage Studioverb, Preamp MKII
STAND TYPE: EasyLock – SLIDE
EasyLock Slide is a type of stand of ours that allows easy side-sliding installation without the use of tools, as shown in the pictures. Make sure to place each leg on the correct side if they are different. Do not attempt to install the stand in any other way, such as from the bottom.
Advantages:
- Portability: It is portable, easy to set up, and ready to use immediately. The design ensures a snug fit and optimized use for each device.
- Stability: Very stable! The stand is built to be secure on desks, featuring rubber pads to prevent slipping and wobbling.
- Ease of Use: You can read and handle your device better from a distance.
- Cohesiveness: Together with these legs, you can manage your device as a cohesive system without worrying about it falling apart.
- Cable Management: A little elevation ensures you can organize your cables under the device, making placement more flexible. Unlike other universal laptop or closed stands, the elevated section between the legs provides cable management without needing to route around the device, which is an extremely convenient feature.
- No Rear Connecting Rod: Just two pieces, nothing else!
- Live Gig Friendly: You can bring it to your live gig – forget the heavy laptop stands and weird unstable things
Disadvantages:
- Decksaver Compatibility: Limited compatibility with Decksaver (if it exists for this device) or other hard covers because of the “bracket shape”. Solution: we make hand-tailored, waterproof, simple black DustCoverPro dust covers for most of the gears. Check availability in our shop!
____________________________________
ABOUT st3nD DESKTOP STANDS:
All our products are 3D printed, followed by post-procession by hand for each item individually. Our goal is to develop and manufacture high-quality desktop stands with the following features:
- Easy installation without glue, screws, or any tools.
- Stable and non-slip design, free of wobbling.
- Easily manage the stand and your device together as a cohesive system, moving them with one hand.
- The stand reduces the device’s footprint on your workspace, or at least doesn’t increase it.
- Lightweight yet strong.
- No middle rods or stabilizers needed (EasyLock stands).
- Extremely portable, perfect for taking to live gigs.
When designing and making stands, I keep these considerations in mind: I manufacture these stands one by one, ensuring that each piece is handmade and unique. This approach allows me to focus on high quality, although it means the stands may not be as inexpensive as mass-produced products. My goal is to lower prices as much as possible to save you money while maintaining high quality.
Customer Satisfaction and Quality Guarantee:
Since 2020, our continuously expanding product range and thousands of excellent reviews across various platforms guarantee that you won’t be disappointed! My mission is to enhance your creative process with better ergonomics, making it more enjoyable and productive. If you encounter any issues, please contact us, and we will resolve any problems to ensure your complete satisfaction. Our 3D printed stands are designed to provide long-lasting support for your devices, ensuring you can focus on your work or performance without any disruptions.
IMPORTANT:
The devices and other elements shown in the images are for illustration purposes only and are not included with the stands.
Shipping time depends on the preparation time, which we strive to minimize, as well as the distance and conditions of your country, and the shipping service or upgrades selected at checkout. For all our shipping services, we will provide you with a tracking number. If your package does not arrive within the estimated shipping time, please let us know, and we will investigate the issue to see what can be done.
By choosing st3nD, you are investing in a product that combines innovation with practicality. Our stands are not just tools; they are designed to seamlessly integrate into your workflow, enhancing your overall experience. Order your 3D printed desktop stand today and see the difference for yourself!
If you can’t find something you’re looking for, feel free to ask. We have overcome many unique demands, so it might just be that we already have a solution in our secret drawer. ;)
| Weight | 0,2 kg |
|---|---|
| Suitable For | Audio/MIDI Interface |
| Brand | st3nD |
| Shape | Tabletop Stand |
| Number of Tiers | 2 |
| Color | Black |
| Material | Plastic |
| Country/Region of Manufacture | Hungary |
| Features | Portable |
| Custom Bundle | No |
| Mount | EasyLock |
| Parameters | 30° |
| Product type | Stand |
Customer Reviews
Write your review
Only logged in customers who have purchased this product may leave a review. Log in now
36,90 € exc. VAT
In stock
Related products
-
STAND for KORG ELECTRIBE 2 SERIES – 15°
28,80 € exc. VATAdd to cart -
STAND for KORG ELECTRIBE 2 SERIES – 30° – Raised (by 20mm)
40,50 € exc. VATAdd to cart -
DJ RISER STAND for KORG ELECTRIBE 2 SERIES
33,30 € exc. VATAdd to cart -
STAND for BEHRINGER X-TOUCH / COMPACT / EXTENDER – 15°
35,10 € exc. VATAdd to cart
What our customers say
There are no contributions yet.