STAND for AlphaTheta RMX IGNITE – 20° Raised by 100mm

20° RAISED STAND
for ALPHATHETA RMX IGNITE

This RMX-IGNITE STAND allows you to integrate your AlphaTheta RMX-IGNITE into your DJ setup with a more ergonomic layout, featuring a 20° tilt and 100 mm raised position.

The elevated design makes it easier to position the RMX-IGNITE behind or alongside your DJ mixer, while keeping the controls clearly visible and easy to reach.

With only the elevation needed for comfortable use, the stand maintains a relatively low profile, helping to keep the DJ clearly visible to the audience instead of hiding them behind unnecessarily tall equipment.

This IGNITE stand provides extra space for cables coming from the back of the mixer positioned in front of the RMX-IGNITE, while the open sections in the legs allow cables to be routed underneath the device, helping you keep your setup clean and organized.

Designed for both live DJ sets and home studio setups, it provides a stable and practical way to place your RMX-IGNITE at a more comfortable working height and angle.

DIMENSIONS ON YOUR DESK
HEIGHT at rear (desk to the top of the stand): 224 mm / 8.82″
DEPTH (the stand’s own footprint on your desk): 240 mm / 9.45″
WIDTH: the same as your device or narrower
Please add your device’s own height, including cables plugged in upwards or backwards. Also note that parts of your device may overhang the footprint towards the front or back.

STAND TYPE: EasyLock – SLIDE
EasyLock Slide is a type of stand of ours that allows easy side-sliding installation without the use of tools, as shown in the pictures. Make sure to place each leg on the correct side if they are different. Do not attempt to install the stand in any other way, such as from the bottom.

Advantages:

• Portability: It is portable, easy to set up, and ready to use immediately. The design ensures a snug fit and optimized use for each device.
• Stability: Very stable! The stand is built to be secure on desks, featuring rubber pads to prevent slipping and wobbling.
• Ease of Use: You can read and handle your device better from a distance.
• Cohesiveness: Together with these legs, you can manage your device as a cohesive system without worrying about it falling apart.
• Cable Management: A little elevation ensures you can organize your cables under the device, making placement more flexible. Unlike other universal laptop or closed stands, the elevated section between the legs provides cable management without needing to route around the device, which is an extremely convenient feature.
• No Rear Connecting Rod: Just two pieces, nothing else!
• Live Gig Friendly: You can bring it to your live gig – forget the heavy laptop stands and weird unstable things

Disadvantages:

• Decksaver Compatibility: Limited compatibility with Decksaver (if it exists for this device) or other hard covers because of the “bracket shape”. Solution: we make hand-tailored, waterproof, simple black DustCoverPro dust covers for most of the gears. Check availability in our shop!

____________________________________