STAND for UAD Apollo Solo / Arrow – 30°
30-degree stand for UAD Apollo Solo and UAD Arrow audio interfaces. Tilts your device 41 degrees for better ergonomics and easier front panel access. Wobble-free 3D-printed stand with rubber pads, 25mm rear elevation, and cable management. Tool-free EasyLock installation. Perfect stand for UAD Apollo Solo users seeking ergonomic desktop positioning.
30° STAND
for your
– UAD APOLLO SOLO
– UAD ARROW
Not compatible with other UAD audio interfaces. We offer a separate product for each one:)
Absolute stable and wobble free solution if you’d like to tilt your device for better visual accessibility and easier reach on your desktop. With the 25mm Raise, you can place your UAD device behind any other gear or controller, and it will still be easy to reach and clearly visible, but more importantly, it keeps the front connections easily accessible.
Installed Measurements with the UAD Apollo Solo / Arrow:
- This stand will tilt the sound card by 30 degrees, resulting in the sound card faceplate being angled at 41° relative to the table surface.
- Overall height with the stand at the back: 133 mm (5.23 inches)
- Overall height with the stand at the front: 54 mm (2.12 inches)
- Footprint of the stand on the desk: 137 mm (5.39 inches)
30° STAND with rubber pads for your UAD Apollo Solo and UAD Arrow audio interfaces.
STAND TYPE: EasyLock – SLIDE
EasyLock Slide is a type of stand of ours that allows easy side-sliding installation without the use of tools, as shown in the pictures. Make sure to place each leg on the correct side if they are different. Do not attempt to install the stand in any other way, such as from the bottom.
Advantages:
- Portability: It is portable, easy to set up, and ready to use immediately. The design ensures a snug fit and optimized use for each device.
- Stability: Very stable! The stand is built to be secure on desks, featuring rubber pads to prevent slipping and wobbling.
- Ease of Use: You can read and handle your device better from a distance.
- Cohesiveness: Together with these legs, you can manage your device as a cohesive system without worrying about it falling apart.
- Cable Management: A little elevation ensures you can organize your cables under the device, making placement more flexible. Unlike other universal laptop or closed stands, the elevated section between the legs provides cable management without needing to route around the device, which is an extremely convenient feature.
- No Rear Connecting Rod: Just two pieces, nothing else!
- Live Gig Friendly: You can bring it to your live gig – forget the heavy laptop stands and weird unstable things
Disadvantages:
- Decksaver Compatibility: Limited compatibility with Decksaver (if it exists for this device) or other hard covers because of the “bracket shape”. Solution: we make hand-tailored, waterproof, simple black DustCoverPro dust covers for most of the gears. Check availability in our shop!
____________________________________
ABOUT st3nD DESKTOP STANDS:
All our products are 3D printed, followed by post-procession by hand for each item individually. Our goal is to develop and manufacture high-quality desktop stands with the following features:
- Easy installation without glue, screws, or any tools.
- Stable and non-slip design, free of wobbling.
- Easily manage the stand and your device together as a cohesive system, moving them with one hand.
- The stand reduces the device’s footprint on your workspace, or at least doesn’t increase it.
- Lightweight yet strong.
- No middle rods or stabilizers needed (EasyLock stands).
- Extremely portable, perfect for taking to live gigs.
When designing and making stands, I keep these considerations in mind: I manufacture these stands one by one, ensuring that each piece is handmade and unique. This approach allows me to focus on high quality, although it means the stands may not be as inexpensive as mass-produced products. My goal is to lower prices as much as possible to save you money while maintaining high quality.
Customer Satisfaction and Quality Guarantee:
Since 2020, our continuously expanding product range and thousands of excellent reviews across various platforms guarantee that you won’t be disappointed! My mission is to enhance your creative process with better ergonomics, making it more enjoyable and productive. If you encounter any issues, please contact us, and we will resolve any problems to ensure your complete satisfaction. Our 3D printed stands are designed to provide long-lasting support for your devices, ensuring you can focus on your work or performance without any disruptions.
IMPORTANT:
The devices and other elements shown in the images are for illustration purposes only and are not included with the stands.
Shipping time depends on the preparation time, which we strive to minimize, as well as the distance and conditions of your country, and the shipping service or upgrades selected at checkout. For all our shipping services, we will provide you with a tracking number. If your package does not arrive within the estimated shipping time, please let us know, and we will investigate the issue to see what can be done.
By choosing st3nD, you are investing in a product that combines innovation with practicality. Our stands are not just tools; they are designed to seamlessly integrate into your workflow, enhancing your overall experience. Order your 3D printed desktop stand today and see the difference for yourself!
If you can’t find something you’re looking for, feel free to ask. We have overcome many unique demands, so it might just be that we already have a solution in our secret drawer. ;)
| Weight | 0,2 kg |
|---|---|
| Shape | Tabletop Stand |
| Brand | st3nD |
| Number of Tiers | 1 |
| Custom Bundle | No |
| Color | Black |
| Material | Plastic |
| Features | Portable |
| Country/Region of Manufacture | Hungary |
| Suitable For | ["Audio/MIDI Interface", "Multi-Track Recorder", "Preamp"] |
| Mount | EasyLock |
| Parameters | 30°, RAISED |
| Product type | Stand |
Customer Reviews
Write your review
Only logged in customers who have purchased this product may leave a review. Log in now
24,30 € exc. VAT
In stock
Related products
-
STAND for POLYEND PLAY – 20° – Open Style
36,90 € exc. VATAdd to cart -
STAND for iCON PLATFORM NANO – 15°
18,90 € exc. VATAdd to cart -
STAND for UAD APOLLO Twin X Duo / Twin X Quad – 30° – Raised (by 30mm)
22,50 € exc. VATAdd to cart -
STAND for AKAI MIDIMIX – 15° – Raised (by 20mm)
31,50 € exc. VATAdd to cart
What our customers say
There are no contributions yet.